|High Temperature Light Controller Watchdog iGS-012: J
|Plug iGS-012 in the 110-120 volt wall socket chosen to supply your lighting equipment. Plug lighting equipment in 110-120 volt output of the iGS-012 (maximum charge of 15 Amps).
Keep temperature sensor far of any source of heat. Temperature sensor should be located above the floor level and near top of plant canopy.
• Can control lighting equipment plugged in a iLS4-120, iLS4-120S or iLS4-240 by connecting sense cord of iLS4 to iGS-012.
The iLS4-120, iLS4-120S and iLS4-240 can be connected in a row to control many pieces of lighting equipment.
• One year warranty.
|Jardine Warehouse has a minimum order of $50.00. |
PLEASE, NO PO BOXES – STREET ADDRESS ONLY!
In Stock! Products from the J warehouse are 98% in stock. Jardine (J) fulfillment center ships UPS, Fedex or common carrier to street addresses only, Ground or Express. You will be given the Express option on checkout.
You will get the tracking number as shipment confirmation to your email.
The J warehouse ships SIGNATURE REQUIRED.
The J warehouse does ship internationally.
Since HI, AK & US Territories force air shipment, air ship rates will be applied to your order.
|See our Knowledge Center for info on: |
|6. x 8. x 3. IN |
| Intelligent Growing Systems |
All information on this site is provided for informational purposes only. It should not be used to
self-diagnose or personally treat any medical condition or disease or prescribe any medication. If
you have a medical condition you are urged to contact your personal health care provider. Statements
on this website have not necessarily been evaluated by the Food and Drug Administration, and are not
intended to diagnose, treat, cure or prevent any disease.